RM3090E _58 Vehicle Interior _008690 THEFT DETERRENT / KEYLESS ENTRY _0050372 INTRUSION SENSOR A

THEFT DETERRENT / KEYLESS ENTRY INTRUSION SENSOR REMOVAL

PROCEDURE

Hide Display 1. PRECAUTION

NOTICE:: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION201212,201410,_V1,_008731,_0049918,RM1000000004DZ6,201410,201504,_V1,_008731,_0049918,RM100000000HFP9,201504,999999,_V1,_008731,_0049918,RM100000000JQM7,

Hide Display 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:: When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION201212,201311,_V1,_008731,_0049918,RM1000000004DZ8,201311,201410,_V1,_008731,_0049918,RM100000000C1G2,201410,201504,_V1,_008731,_0049918,RM100000000HFOT,201504,999999,_V1,_008731,_0049918,RM100000000JQM8,

Hide Display 81260A 3.REMOVE MAP LIGHT ASSEMBLY

Click hereVehicle Interior>LIGHTING (INT)>PERSONAL LIGHT>REMOVAL201212,999999,_58,_008429,_0050312,RM1000000004F56_01_0001,

Hide Display 86250E 4.REMOVE AMPLIFIER MICROPHONE ASSEMBLY

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AMPLIFIER MICROPHONE ASSEMBLY>REMOVAL201212,999999,_56,_008775,_0050367,RM1000000004FEC_01_0002,

Hide Display 89732 5.REMOVE THEFT WARNING RADAR SENSOR

a.

E266719

w/ Sliding Roof:

i.

Disconnect the connector.

ii.

Remove the 2 screws.

iii.

Detach the 2 clamps and disconnect the theft warning radar sensor.

b.

E266720

w/o Sliding Roof

i.

Disconnect the connector.

ii.

Remove the 2 screws.

iii.

Detach the 3 clamps and disconnect the theft warning radar sensor.

c.

E266721

w/ Sliding Roof:

i.

Remove the 6 screws.

ii.

Detach the 2 claws and remove the overhead junction block assembly.

d.

E266722

w/o Sliding Roof:

i.

Remove the 5 screws.

ii.

Detach the 2 claws and remove the overhead junction block assembly.

e.

Remove the 4 screws and theft warning radar sensor.

E266723C01

0.688,0.177 1,0.333 0.313,0.156 10 *A 3.833,0.25 4.146,0.406 0.313,0.156 10 *B

*A

w/ Sliding Roof

*B

w/o Sliding Roof